System | Form Factor | 2U Rackmount Frame w/ 2x 2U Blades |
Gross Weight | 27 kg |
Feature | Two nodes in one chassis |
Chassis Model | YR290 |
Dimension (D x W x H) | 28.74" x 17.32" x 3.44" (730 x 440 x 87.5mm) |
Blade Dimension (D x W x H) | 28.74" x 8.46" x 3.32" (730 x 214.8 x 84.5mm) |
Motherboard | S7018GM3NR |
Board Dimension | 6.3"x16.4" (160x416.6mm), per blade |
Front Panel (per blade) | Buttons | (1) RST / (1) PWR / (1) ID |
LEDs | (1) PWR / (1) BMC / (2) LAN / (1) HDD |
I/O Ports | (2) USB ports |
External Drive Bay (per blade) | Type / Q'ty | 2.5" Hot-Swap / (8) |
HDD backplane support | SATA-II 3.0Gb/s |
System Cooling Configuration (per blade) | FAN | (3) 6cm fans |
Air Duct | (1) Customized for the YR290 blade |
Peripherals (per blade) | Type of ODD / Q'ty | Ultra-slim DVD-ROM (optional) |
Power Supply (per blade) | Type | ERP1U |
Input Range | Full-range AC(100-240V) |
Frequency | 47 - 63 Hertz |
Output Watts | 450 Watts |
Efficiency | PFC / 80-plus Silver |
Redundancy | (1+1), the redundant unit is not included in default configuration |
Serviceability | Cold-swap |
Processor (per blade) | Supported CPU Series | Intel Xeon Processor 5500/ 5600 Series |
Socket Type / Q'ty | LGA1366 / (2) |
Thermal Design Power (TDP) wattage | Max up to 95W |
System Bus | Up to 4.8/ 5.86/ 6.4GT/s with Intel QuickPath Interconnect (QPI) support |
Chipset (per blade) | MCH / ICH | Intel 5500 / ICH10R |
Memory (per blade) | Supported DIMM Qty | (6)+(6) DIMM slots |
DIMM Type / Speed | DDR3/DDR3L 800/1066/1333/1600* RDIMM/UDIMM / * limit 1 per channel for 1333MHz speed |
Capacity | Up to 96GB RDIMM / 48GB UDIMM |
Memory channel | 3 Channels per CPU |
Memory voltage | 1.5V |
Expansion Slots (per blade) | PCI-E | (1) PCI-E Low-Profile Gen.2 x16 slot |
Pre-install TYAN Riser Card | M7018-R16-2F1L, 2U PCI-E x16 riser card (right) |
Max. HBA Dimension (H x L) | (2) 111.15mm x 312.00mm (FH/FL) / (1) 68.90mm x 167.65mm (HH/HL) |
LAN (per blade) | Port Q'ty | Total (3) ports, (1) dedicated for IPMI |
Controller | Intel 82576EB / Intel 82574L |
Storage (per blade) | SATA | Connector | (4) SATA |
Controller | Intel ICH10R |
Speed | 3.0 Gb/s |
RAID | RAID 0/1/10/5 (Intel Matrix RAID) |
Graphic (per blade) | Connector type | D-Sub 15-pin |
Resolution | 1600x1200@60Hz |
Chipset | Aspeed AST2050 |
I/O ports (per blade) | USB | (5) ports (2 at front, 2 at rear, 1 Type A onboard) |
COM | (1) DB-9 COM port |
VGA | (1) D-Sub 15-pin port |
RJ-45 | Total (3) ports, (1) dedicated for IPMI |
System Monitoring (per blade) | Chipset | Winbond W83793G |
Temperature | Monitors temperature for CPU & system environment |
LED | Fan fail LED indicator / Over temperature warning indicator |
Others | Chassis intrusion detection / Watchdog timer support |
Server Management (per blade) | Onboard Chipset | Onboard Aspeed AST2050 |
AST2050 IPMI Feature | IPMI 2.0 compliant baseboard management controller (BMC) / USB 2.0 virtual hub / BIOS update |
AST2050 iKVM Feature | 24-bit high quality video compression / Dual 10/100 Mb/s MAC interfaces |
BIOS (per blade) | Brand / ROM size | AMI / 4MB |
Feature | Multiple boot options / Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot / ACPI 2.0 power management /Power on mode after power recovery / User-configurable H/W monitoring / Auto-configurable of hard disk types |
Operating System | OS supported list | Coming soon |
Regulation | FCC (DoC) | Class A |
CE (DoC) | Yes |
Operating Environment | Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) |
Non-operating Temp. | - 40° C ~ 70° C (-40° F ~ 158° F) |
In/Non-operating Humidity | 90%, non-condensing at 35° C |
RoHS | RoHS 6/6 Compliant | Yes |
Package Contains | Heatsink / Cooler | (4) LGA1366 CPU heatsinks |
Rail kit | (1) sliding rail kit for YR290/TN70 |
Manual | (1) MB User's manual + (1) BB User's manual |
Installation CD | (1) TYAN installation CD |
Cable | Power Cord | (2) CCBL-0310, US type power cord / (2) CCBL-0300, EU type power cord |